|Place of Origin:||Jiangsu, China|
|Certification:||ASME, ISO, ABS|
|Minimum Order Quantity:||1 set|
|Packaging Details:||Export Wooden Case|
|Delivery Time:||10-30 days|
|Payment Terms:||T/T, L/C|
|Supply Ability:||500 Sets / Month|
|Name:||Static Mixer||Materials:||SS304 Or SS316 Or Carbon Steel Lining PTFE|
|Mix Element Type:||SV||Inlet And Outlet Size:||As Your Pipe Size|
|Length:||As Your Request||Injection Horse Qty:||As Your Request|
SV Type Inline Static Mixer For Mixing Gases in a continuous process
UNITE SV static mixer unit is composed of a corrugated plate cylinder assembly into certain specifications. It has no moving parts, and depends on the special structure and fluid movement of the unit, so that the miscible fluids are dispersed and mixed with each other, so as to achieve good mixing effect.
The mixing process of SV type static mixer is carried out by mixing element is fixed in the tube, because the mixed element, the fluid and left and right, changing the flow direction, the center will not only flow to the periphery, and the surrounding fluid into the center, resulting in good effect of radial mixing. Along with this, the rotation of the fluid itself takes place at the interface between adjacent components. This mixing of the perfect radial circulation reduces the temperature gradient, velocity gradient and mass gradient of the fluid at the cross section of the tube.
The product itself has no moving parts, and relies on the special structure and fluid movement of the unit, so that the miscible fluids are dispersed and mixed with each other to achieve good mixing effect.
The cylinder and technical characteristics of SV type corrugated plate unit is assembled into a certain size: the maximum dispersion is 1-2m, the liquid phase non-uniformity is less than or equal to 1-5% the product of pressure drop is calculated on the basis of water as the diameter of reference, and considering the effects of porosity and coefficient of friction.
Suitable for mixing and emulsifying viscosity is less than or equal to 102 centipoise liquid-liquid, liquid gas, gas, reaction, absorption, extraction, heat transfer process. DH = 3.5 for viscosity is less than or equal to 102 centipoise clean media, DN more than 5 applications can be accompanied by a small amount of non bonded medium impurities. But because of the smaller hydraulic diameter, the corresponding resistance drop Delta P is also larger, to improve the processing capacity, in addition to increasing nominal diameter, the power required is also large. Dynamic viscosity conversion: 1 Bo (P) = 0.1 pa - seconds (Pa - s) 1 CPS (cP) =0.001 pa - (Pa - s).
|Model||Inlet/Outlet DN||Hydraulic Diameter dh||Length mm|
Address: NO.24 Yu-an 1st Road, Shuofang Industrial Park, Wuxi New District, Jiangsu
Factory Address:NO.24 Yu-an 1st Road, Shuofang Industrial Park, Wuxi New District, Jiangsu